Panasonic CF-VDR302U - WinDVD Software; Installing WinDVD

18
E
Using the Software
WinDVD
Installing WinDVD
WinDVD is a software application for DVD playback.
Install “WinDVD” using “DVD Drive Utility Disc” ( below).
1
Log on to Windows as an administrator.
2
Set “DVD Drive Utility Disc” in the drive.
3
Windows Vista
At the [AutoPlay] message, click [Run SETUPUTIL.EXE] - [Continue]. [Utility Setup
tool] screen will appear (allow some time for disc recognition).
When the setup program will not run automatically, click (Start) and input [x:\
setuputil.exe]*
3
in [Start Search], and press
ENTER
, and then click [Continue].
Windows XP
At the confi rmation message, click [OK].
[Utility Setup tool] screen will appear (allow some time for disc recognition).
When the setup program will not run automatically, input [x:\setuputil.exe]*
3
in [start]
- [Run] and click [OK].
*
3
“x” is the drive letter. You can change the letter to suit your preference.
4
Click [WinDVD Setup].
5
Click [Next] at the welcome message.
6
After reading the “License Agreement”*
4
, click [Yes] if you agree to the terms.
*
4
Refer to the “LIMITED USE LICENSE AGREEMENT” on the Operating Instruc-
tions of the computer.
7
Follow the on-screen instructions and install “WinDVD”.
8
Click [Finish].
9
Click [Exit] on [Utility Setup tool] screen, and remove “DVD-Drive Utility Disc”.
Windows Vista
In the case of uninstalling WinDVD, an error of “Files in Use” will be displayed.
Click “Ignore” to uninstall it normally.
NOTE
CF-VDR302U.indb18CF-VDR302U.indb18 2007/09/2521:05:412007/09/2521:05:41