Panasonic CF-VDR302U - Running WinDVD; To access the Online Manual

19
E
You can run “WinDVD” using either of the following procedures.
Windows Vista
Double-click on the desktop.
Click (Start) - [All Programs] - [InterVideo WinDVD] - [InterVideo WinDVD for
Panasonic].
Windows XP
Double-click on the desktop.
Click [start] - [All Programs] - [InterVideo WinDVD] - [InterVideo WinDVD].
Running WinDVD
To access the Online Manual
Right-click on the [WinDVD] screen and click [Help].
Windows Vista
Click “?” of the [WinDVD] screen.
Windows XP
Click “?” of the WinDVD control panel.
NOTE
DVD-Audio cannot be played back using “WinDVD”.
Do not start “WinDVD” while the hard disk drive indicator is blinking immedi-
ately after the computer is turned on.
While “WinDVD” is running, do not:
• Enter sleep(Windows Vista), standby(Windows XP) or hibernate.
• Switch the display by pressing
Fn
+
F3
.
During video playback, do not:
• Eject the disc.
• Use other applications or the Command Prompt.
• Change the settings of the screen properties.
NOTE
Windows Vista
When a disc has so many folders, “WinDVD” may not operate correctly. Remove
the disc as follows.
• Click (Start) - [Computer], right-click [DVD/CD RW Drive (x:)] and select
[Eject] from the menu.
CF-VDR302U.indb19CF-VDR302U.indb19 2007/09/2521:05:412007/09/2521:05:41