Getting Started
17
5 Setup Windows
Select language and click [Next].
Follow the on-screen instructions.
l
The computer restarts several times. Do not touch the
touchscreen, external keyboard or external mouse, and
wait until desktop screen has been displayed.
l
After the computer is turned on, the screen remains black
or unchanged for a while, but this is not a malfunction. Wait
for a moment until the Windows setup screen appears.
l
During setup of Windows, use the touchpad and clicking to
move the pointer and to click an item.
l
Setup of Windows will take approximately 5 minutes.
Go to the next step, confirming each message on the display.
l
You can set the Wireless Network after the setup of
Windows is complete.
If “Let’s get connected” is displayed, you can select [Skip
this step].
l
We recommend that you set the password after the setup
of Windows in complete.
CAUTION
l
You can change the user name, image and security setting
after setup of Windows.
l
Use standard characters as a computer name: numbers 0
through 9, uppercase and lowercase letters from A to Z, and
the hyphen (-) character. Do not use the following words and
characters for user name: CON, PRN, AUX, CLOCK$, NUL,
COM1 to COM9, LPT1 to LPT9, LPT, &, space.
If the error message “The computer name is not valid” ap-
pears, check if characters other than the above are not
entered. If the error message still remains on the display, set
the key entry mode to English (“ENG”) and enter characters.
6 Restart the computer
A
Click
(Start).
B
Click
(Power) - [Restart].
l
A portion of the Panasonic PC Settings Utility functions will
be enabled after the computer restarts.
NOTE
l
When the “Emergency notification setting” screen appears,
read the on-screen messages carefully. Follow the on-screen
instructions.
You can set the “Emergency notification setting” after the
setup of Windows is complete.
BM161_Readme(CPE03286ZA)_OI_E.indb 17 2017/07/10 11:08:25
To Next Page
Loading...
