Panasonic CQ-RDP112N

3
English
Space
I
Contents
Specifications
●
Specifications and design are subject to modification
without notice due to improvements.
Note
■ General
Power Supply
Tone Controls (Bass)
Tone Controls (Treble)
Current Consumption
Maximum Power Output
Power Output
Speaker Impedance
Pre-Amp Output Voltage
Pre-Amp Output Impedance
Dimensions (Main Unit)
Weight (Main Unit)
DC 12 V (11 V - 16 V),
Test Voltage 14.4 V, Negative Ground
±12 dB at 100 Hz
±12 dB at 10 kHz
Less than 2.5 A
(CD mode, 0.5 W 4-Speaker)
45 W x 4 (at 4 Ω)
20 W x 4 (DIN45 324, at 4 Ω)
4 - 8 Ω
2 V (CD mode)
600 Ω
178(W) x 50(H) x 150(D) mm
1.4 kg
■ Stereo Radio
Frequency Range
Usable Sensitivity
Stereo Separation
87.5 - 108 MHz
6 dB/µV(S/N 30 dB)
35 dB (at 1 kHz)
Frequency Range
Usable Sensitivity
531 - 1 602 kHz
28 dB/µV (S/N 20 dB)
Frequency Range
Usable Sensitivity
153 - 279 kHz
32 dB/µV (S/N 20 dB)
■ CD Player
Sampling Frequency
DA Converter
Error Correction System
Pick-Up Type
Light Source
Wavelength
Frequency Response
Total Harmonic Distortion
Signal to Noise Ratio
Wow and Flutter
Channel Separation
Panasonic Super Decoding
Algorithm
Astigma 3-beam
Semiconductor laser
780 nm
20 Hz - 20 kHz (±1 dB)
96 dB
0.01 % (1 kHz)
Below measurable limits
75 dB
8 times oversampling
MASH 1 bit/4 DAC System
CQ-RDP162N
CQ-RDP152N
CQ-RDP102N
CQ-RDP112N
CQ-RDP142N
Stereo/Mono
Power Amplifier :
CY-M7052EN
(Up Grade)
● Specifications ................................. 3
● Introduction..................................... 4
● Power and Audio Controls .............. 6
● Radio Basics................................... 7
Radio Data System (RDS).............. 8
● CD Player and CD Changer ......... 10
● Troubleshooting ............................ 11
Refer to the Installation Instructions
supplied separately for installation and
wiring.
FM
MW
LW