Pin No. Port Descriptions I/O Vol (V)
81 /RSTP Power on reset I 3.3
82 VSSIO I/O pad ground - 0
83 RXD1 Not used - -
84 SSPIN1 SSP1 data in / UART1 16X clock I/O 15
85 VSS Core ground - 0
86 SSPOUT1 SSP1 sata out / UART1 DTR I/O 0
87 SSPCLK1 SSP1 clock / UART1 CTS I/O 3.3
88 SSPCLK0 Not used - -
89 VDD Core power (1.8V) - 1.8
90 SSIN0 Not used - -
91 VDDIO I/O pad power (3.3V) - 3.3
92 SSPOUT0 Not used - -
93 TXD0 UART0 serial data O 3.2
94 RXD0 UART0 serial data I 3.0
95 /CTS0 Not used - -
96 /RTS0 Not used - -
97 VSSIO I/O pad ground - 0
98 CXI Crystal Oscillator terminal I 1.6
99 CXO Not used - -
100 OSCVSS Oscillator ground - 0
101 OSCVDD Oscillator power (1.8V) - 1.8
102 MVCLVDD Main/Video clock PLL power (3.3V) - 3.3
103 SCEN Not used - -
104 MVCKVSS Main/Video clock PLL Ground - 0
105 ACLKVSS Audio clock PLL ground - 0
106 SCMD Not used - -
107 ACLKVDD Audio clock PLL power - 3.3
108 VDDDAC DAC digital power (1.8V) - 1.8
109 VSSDAC DAC digital ground - 0
110 CVBS2/CR/R Composite Cr/Component Cr/SCART Red O 0.5
111 IOM Cascaded DAC differential output O 1.0
112 C/CB/B Chrominance/Component Cb/SCART Cb O 0.7
113 VAA3 DAC analog power (3.3V) - 3.3
114 Y/G Luminance/SCART G O 0.4
115 VSSA DAC analog ground - 0
116 VREF Not used - -
117 VAA - - 1.8
118 CVBS/C Composite/S-Video Chrominance O 0.5
119 RSET Current setting resistor connection O 1.4
120 COMP Compensation capacitor connection O 2.0
121 VSS Core ground - 0
122 VCLK Not used - -
123 VSYNC Not used - -
124 HSYNC Not used - -
125 VDDIO I/O pad power (3.3V) - 3.4
126-131 VI07-02 Not used - -
132 VSSIO I/O pad ground - 0
133 Not used - -
134 Not used - -
135 VDD Core power (1.8V) - 1.9
136-139 AD31-28 Not used - -
140 VDDIO I/O pad power (3.3V) - 3.4
141-144 AD27-24 Not used - -
145 /PWE3 Not used - -
19
To Next Page
Loading...
