▲
11
<Note>
Regarding remote control.
■ If the current time is not set correctly, correct
Timer setting will not be possible.
■ When the Timer is set, the current time display will
vanish.
■ [RESET] points will clear the memory once they
are shorted.
■ [B ↔ A] switch is used when two air conditioners
units have been installed in one room. Please
consult your dealer.
[RESET] points
Setting the Timer
[B ↔ A] switch
If there is a power failure.
OFF-TIMER
SET
➡
To reset the Timer.
(Example) If the OFF Timer has been set.
■ Even if there is a power failure, the setting
time is still stored in the memory because the
remote control is a battery operated type.
q
OFF/ON
SLEEP
PM
OFF-TIMER TIME
ON-TIMER
SET
CANCEL
11:30
OPEN
To Next Page
Loading...
Need help?
General
