position (angle 0°).
C. Cancelling
Hot starting will be cancelled when the compressor is turned on
or the indoor unit pipe temperature sensor is 18°C or higher or
after 1 minute of operation.
After cancellation, the “PREHEAT” display on the remote
control disappears and the louvre operation returns to the
previous setting.
(However, for 2 minutes after cancellation, the indoor unit fan
operates at LOW speed, and then returns to the previous
setting.)
<When hot start operation is cancelled by temperature>
<When hot start operation is cancelled by time>
2. When defrosting is completed
A. Start
Hot start control commences when defrosting is completed.
B. Operation
“PREHEAT” appears on the remote control display. (Other
displays remain unchanged)
140
To Next Page
Loading...
