No. Setting type Factory
shipment
Remarks
1 Group address
setting (twin/triple
address setting)
OFF When group operation is being carried out using the
control, this address is set in order to control the
starting for the indoor units. (If No. 8 is ON, twin/
address setting is carried out.)
2 OFF
3 OFF
4 OFF
5 Automatic restart ON When set to ON, operation after a power outage
the settings which were in effect before the outage. (
backup time is semipermanent.)
6 Filter sign time OFF When set to ON, the filter sign times can be set to
7 Louvre control ON When set to OFF, louvre control is disabled.
8 Twin/triple slave unit
setting
OFF When set to ON, the unit is designated as a slave unit.
28. WIRED REMOTE CONTROL INSTALLATION
MANUAL
148
To Next Page
Loading...
