connected and the connection methods, conditions such as the
connection configuration (twin or triple format) and remote-control
functions such as automatic louvre operation and cooling or
heating mode are automatically detected and set instantly.
2.5. Wired Remote Control
- The new design includes an easily-visible red pilot lamp. The
power can be turned on and off at a single touch, without opening
the cover.
- Has a built-in thermistor, allowing indoor temperature detection in
accordance with indoor conditions by switching with main unit
thermistor.
- Twin non-polar wires make installation work easy. (10 m cable
supplied as accessory.)
2.6. Wireless Remote Control
8
To Next Page
Loading...
