101
Figure 3 Figure 4
16.2.1.3 To Remove Discharge Grille
Figure 5
8.
Pull out the main
electronic controller
halfway.
7. Detach the CN-DISP
connector then remove
the indicator complete.
9. Detach connectors as labeled from the
electronic controller. Then pull out main
controller gently.
5. Detach the earth wire
connection.
6. Remove screw Terminal
Board complete and earth
wire.
CN-FM
CN-STM1
CN-TH
CN-CNT
CN-DISP
RY-PWR
AC304
AC303 G301
11. Then pull the discharge grille
downward gently to dismantle it.
10. Pull out to remove the drain hose
from the discharge grille.
To Next Page
Loading...
