To Next PageTo Next PageWhy is my Panasonic Air Conditioner HEAT/COOL mode not working efficiently?
If the HEAT/COOL mode on your Panasonic Air Conditioner isn't working efficiently, try the following: * Ensure the temperature is set correctly. * Close all doors and windows. * Clean or replace the filters. * Make sure there are no obstructions blocking the air inlet and outlet vents.
General| Cooling Capacity | 2.0 kW |
|---|---|
| Heating Capacity | 2.5 kW |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Noise Level (Outdoor) | 48 dB |
Steps to insert batteries into the remote control.
Instructions for setting the clock on the remote control.
Explains warning symbols and general safety advice.
Safety instructions for indoor and outdoor units.
Safety guidelines for electrical power connections and usage.
Safety advice for using and handling the remote control.
How to control the direction of airflow from the unit.
How to change the fan speed settings.
How to switch between POWERFUL and QUIET operation modes.
How to use the sleep mode for comfortable nighttime operation.
Instructions for setting ON and OFF timers for the unit.
Recommended temperature ranges for operation.
Explanation of AUTO, HEAT, COOL, and DRY modes.
Recommended temperature settings for energy efficiency.
How the unit restarts after a power failure.
How to wipe the indoor unit with a soft, dry cloth.
How to ensure the outdoor unit's air outlet is clear.
How to wash and maintain the air filters.
How to remove and clean the front panel of the unit.
Lists common symptoms and their potential causes.
Checks to perform before contacting a service dealer.
Troubleshooting steps for missing or malfunctioning remote controls.
How to retrieve error codes using the remote control.
Guidelines for disposing of old equipment and batteries.
Statement of compliance with hazardous substance regulations.
