EasyManua.ls Logo

Panasonic CS-BE20TKD - Cleaning Instructions; Indoor Unit Cleaning; Outdoor Unit Cleaning; Air Filters Cleaning

Panasonic CS-BE20TKD
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular intervals.
Dirty unit may cause malfunction and you may
see error code “H 99”. Please consult authorised
dealer.
Switch off the power supply and unplug before
cleaning.
Do not touch the aluminium n, sharp parts may
cause injury.
Do not use benzine, thinner or scouring powder.
Use only soap ( pH 7) or neutral household
detergent.
Do not use water hotter than 40 °C / 104 °F.
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Outdoor unit
Make sure the air outlet of the
outdoor unit is not blocked by
fallen leaves or snow.
Clear any blockage from the
drain pipe.
Air lters
Once every 2 weeks
• Wash/rinse the lters gently
with water to avoid damage to
the lter surface.
• Dry the lters thoroughly under shade,
away from re or direct sunlight.
Replace any damaged lters.
Remove air lter Attach air lter
Insert into the unit
Front panel
Wash gently and dry.
Remove the front panel Close it securely
P
OWER
T
IMER
1
Release the hooks at
both ends.
2
Pull out and lift up.
POWER
TIMER
1
Insert at
both sides.
2
Push in.
3
Close down.
4
Press both ends and center of the front panel.
Indoor unit
POWER
TIMER
Aluminium n
Front panel
Air lters
ACXF55-10540_01EN.indd 10ACXF55-10540_01EN.indd 10 3/2/2017 11:23:18 AM3/2/2017 11:23:18 AM

Related product manuals