Why does the indoor fan stop occasionally during heating operation of my Panasonic CS-BZ25XKE Air Conditioner?
The indoor fan stops occasionally during heating operation of your Panasonic Air Conditioner to avoid unintended cooling effect.
What to do if my Panasonic Air Conditioner is not working efficiently in HEAT/COOL mode?
If your Panasonic Air Conditioner isn't working efficiently in HEAT or COOL mode, ensure that you set the temperature correctly, close all doors and windows, clean or replace the filters, and clear any obstructions at the air inlet and air outlet vents.
What to do if my Panasonic CS-BZ25XKE Air Conditioner remote control does not work?
If the remote control for your Panasonic Air Conditioner isn't working (display is dim or transmission signal is weak), make sure you insert the batteries correctly or replace weak batteries.
Why is the POWER indicator blinking on my Panasonic CS-BZ25XKE Air Conditioner before it's switched on?
The blinking POWER indicator on your Panasonic Air Conditioner before it is switched on indicates a preliminary step to prepare for the TIMER operation after it has been set. When the Timer is set to ON, the unit may start earlier (up to 35 minutes) before the actual set time to achieve the desired temperature on time.
Why is the POWER indicator blinking on my Panasonic Air Conditioner during HEAT mode?
The POWER indicator blinks during HEAT mode with no warm air supply (and flap is closed) on your Panasonic Air Conditioner because the unit is in defrost mode (and AIR SWING has been set to AUTO).
Why is there discoloration of some plastic parts on my Panasonic CS-BZ25XKE Air Conditioner?
Discoloration of some plastic parts on your Panasonic Air Conditioner is subjected to the types of materials used in the plastic parts and is accelerated when exposed to heat, sunlight, UV light, or environmental factors.
Why do I hear a water flowing sound during operation of my Panasonic CS-BZ25XKE?
The water flowing sound during operation of your Panasonic Air Conditioner is caused by refrigerant flow inside the unit.
Why does mist emerge from the indoor unit of my Panasonic Air Conditioner?
Mist emerges from the indoor unit of your Panasonic Air Conditioner because, during cooling operation, the discharged cold air may condense to water vapour.
Why is the cooling/heating capacity reduced during lowest fan speed setting on my Panasonic CS-BZ25XKE Air Conditioner?
If the cooling or heating capacity is reduced during the lowest fan speed setting on your Panasonic Air Conditioner, increase the fan speed to increase the capacity.
What does it mean if the POWER INDICATOR BLINKS, THEN STOPS BLINKING DURING COOL/DRY mode on my Panasonic CS-BZ25XKE Air Conditioner?
If the POWER INDICATOR BLINKS, THEN STOPS BLINKING DURING COOL/DRY mode on your Panasonic Air Conditioner, it means that the system has been locked to operate in HEAT mode only.
Step-by-step guide to install batteries in the remote control for operation.
Instructions on how to set the time on the remote control for accurate timer functions.
Procedure to turn the air conditioner on and off using the remote control.
Guide to choosing desired modes like AUTO, HEAT, DRY, and COOL.
Instructions to select and set the desired temperature for comfort.
Controls airflow direction, fan speed, and quiet operation for comfort.
Features for rapid temperature adjustment and sleep comfort settings.
Procedure for setting specific ON and OFF times for automated operation.
Recommended temperature ranges for efficient and optimal unit performance.
Explains operation modes (AUTO, HEAT, COOL, DRY) and airflow behavior.
Tips for energy saving and understanding auto restart functionality.
Instructions for cleaning the indoor unit, front panel, and air filters.
Guidance on cleaning the outdoor unit and clearing the drain pipe.
Information on cleaning and replacing the air purifying filter.
Identifies common symptoms that do not indicate a malfunction.
Essential checks to perform before contacting a service technician.
Resolving remote control problems and adjusting indicator brightness.
Steps for seasonal checks and preparing the unit for extended non-use.
Conditions that mandate professional service intervention.
Procedure to check error codes using the remote control for diagnosis.
Lists diagnostic codes and their corresponding abnormality/protection meanings.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Weight (Indoor Unit) | 8 kg |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A+ |
| Noise Level (Outdoor Unit) | 47 dB(A) |
| Coefficient of Performance (COP) | 4.00 |
| Type | Split System Air Conditioner |
To Next Page