8
• Specifications are subject to change without notice for further improvement.
Fan Motor
Description Cross-flow Fan Propeller Fan
Material AS + Glass Fiber
20%
AS + Glass Fiber 20%
Type Induction
(4-poles)
Induction (6-poles)
Input W 29.3 - 26.3 134.0 - 118.7
Rated Output W 15 50
Fan
Speed
Low rpm 730 - 730 —
Medium rpm 1,000 - 1,000 —
High rpm 1,210 - 1,210 765 - 725
SuperHigh rpm 1,300 - 1,300 —
Heat
Exchanger
Description Evaporator Condenser
Tube material Copper Copper
Fin material Aluminium Aluminium (Blue Coat)
Fin Type Slit Fin Louver Fin
Row / Stage 2 x 15
(Plate fin configuration, forced draft)
2 x 24
FPI 19 16
Size (W × H × L) mm 610 x 315 x 25.4
756.0 x 609.6 x 44
719.5
Refrigerant Control Device — Capillary Tube
Refrigeration Oil (c.c) — SUNISO 4GDID or ATMOS M60 or ATMOS 56M
Refrigerant (R-22) g (oz) —
(A unit) 770 (27.2)
(B unit) 990 (34.9)
Thermostat — —
Protection Device — Overload protector
Capillary
Tube
Length mm — 935, 842, 1,170
Flow Rate l/min — 20.0, 15.5, 10.0
Inner Diameter mm — 2.0, 1.8, 1.6
Air Filter
Material
Style
P. P.
Honeycomb
—
Capacity Control Capillary Tube
Compressor Capacitor µF, VAC — 25 µF, 440 VAC
Fan Motor Capacitor µF, VAC 1.5 µF, 440 VAC 3.0 µF, 450 VAC
Indoor unit Outdoor unit
To Next Page
Loading...
