FAN SPEED
To select fan speed
(Remote control display)
• For AUTO, the indoor fan speed is
automatically adjusted according to the
operation mode.
7
EnglishHow to use
AIR SWING
AUTO
MANUAL
To adjust airfl ow direction
• Keeps the room ventilated.
AIR SWING - AUTO
• In heat mode, the air blows
upwards for a while, then starts
to blow horizontally.
• The vertical airfl ow louver swings
up and down automatically.
AIR SWING
AIR SWING - MANUAL
• The airfl ow direction can be
adjusted as desired by using
remote control.
• Do not adjust the vertical airfl ow
direction louvers by hand.
AIR SWING
To set the timer
To turn ON or OFF the unit at a preset time.
TIMER
SET
CANCEL
ON
OFF
1
2
3
OFF
TIMER
3
Confi rm
SET
OFF
TIMER
TIMER
• To cancel ON or OFF timer, press
ON
or
OFF
then press
CANCEL
.
• If timer is cancelled manually or due to power
failure, you can restore the previous setting
(once power is resumed) by pressing
SET
.
• When ON Timer is set, the unit may start
earlier (up to 30 minutes) before the actual
set time in order to achieve the desired
temperature on time.
• Timer operation is based on the clock set in
the remote control and repeats daily once set.
For clock setting, please refer to Quick guide.
Air outlet selection switch
To select preferred airfl ow pattern.
Selection Pattern Description
This setting blows air from upper outlet only.
This setting automatically decides airfl ow pattern depending on mode and conditions
(Default and recommended).
For Heat mode, during start or low discharge temperature / For Cool
mode, when setting temperature is achieved, the air is blown from the
upper air outlet only.
Air is blown from the upper and lower air outlets for high speed cooling
during COOL mode, and for fi lling the room with warm air during HEAT
mode.