To Next PageTo Next PageWhy does the outdoor unit of my Panasonic CS-E9SD3RW Air Conditioner emit water or steam?
The outdoor unit of your Panasonic Air Conditioner emits water or steam because condensation or evaporation occurs on the pipes.
Why does the POWER indicator blink on my Panasonic CS-E9SD3RW before turning it on?
The POWER indicator might blink before you switch on your Panasonic Air Conditioner because the unit is preparing for operation when the ON timer has been set.
What does it mean when the POWER indicator blinks and the indoor fan stops on my Panasonic CS-E9SD3RW Air Conditioner?
The POWER indicator blinking during operation with the indoor fan stopped indicates that your Panasonic Air Conditioner is in defrost mode. During this process, melted frost is being drained from the outdoor unit.
Why is the TIMER indicator always on in my Panasonic Air Conditioner?
The timer setting on your Panasonic Air Conditioner repeats daily once it has been initially set.
Why does my Panasonic CS-E9SD3RW's outdoor unit emit water or steam?
The water or steam emitted from the outdoor unit of your Panasonic Air Conditioner is due to condensation or evaporation occurring on the pipes.
Why is the TIMER indicator always on for my Panasonic Air Conditioner?
The TIMER indicator remains on because the timer setting repeats daily once it has been set.
How to improve the efficiency of HEAT/COOL mode on my Panasonic Air Conditioner?
If your Panasonic Air Conditioner's HEAT/COOL mode isn't working efficiently, make sure you've set the temperature correctly. Also, ensure all doors and windows are closed, clean or replace the filters, and clear any obstructions at the air inlet and outlet vents.
Why is the TIMER indicator always on on my Panasonic Air Conditioner?
The TIMER indicator on your Panasonic Air Conditioner remains on because the timer setting repeats daily once it has been set.
What to do if the Panasonic CS-E9SD3RW Air Conditioner stops and the TIMER indicator is blinking?
If your Panasonic Air Conditioner unit stops and the TIMER indicator blinks, use the remote control to retrieve the error code.
What to do if my Panasonic CS-E9SD3RW Air Conditioner does not receive the signal from the remote control?
If the Panasonic Air Conditioner unit is not receiving the signal from the remote control, ensure that the receiver is not obstructed. Note that certain fluorescent lights may interfere with the signal transmitter; consult an authorized dealer for assistance.
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.5 kW |
| Heating Capacity | 3.2 kW |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 8 kg |
