Panasonic CS-PS36RKV

16
To select operation mode
AUTO mode - For your convenience
• During operation mode selection the power
indicator blinks.
• Unit selects operation mode during startup
according to temperature setting and room
temperature.
COOL mode - To enjoy cool air
• To reduce power consumption during COOL
mode, use curtains to screen off sunlight and
outdoor heat.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
To adjust temperature setting

Each press will change the temperature settings
by 1 degree.

The temperature should be set between 16 to 30
degrees Celsius.

Continue to press and hold the temperature
button will change the temperature setting
quickly.
How to use
To adjust horizontal airow direction
• Manually adjustable.
• Grab the control lever with
your ngers and adjust the
horizontal air deector.
Auto OFF/ON button
Use when remote control is
misplaced or a malfunction
occurs. Raise the front panel:
• To use in AUTO mode, press
the button once.
• To use in COOL mode, press
and hold the button until 1 beep
is heard, then release.
• Press the button again to turn
off.
Press to increase the temperature
Press to decrease the temperature
TIMER(Orange LED) QUIET(Green LED)
POWER(Green LED) POWERFUL(Red LED)
Indicator
※LED is installed at the back of printed lm
Remote control display
Press to restore the
remote control to
default setting.
Not used in normal
operations.