19
English
Cleaning instructions
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Front panel
To clean front panel, gently wash with sponge,
wipe or let stand in shade.
Remove the front panel
Raise
Pull out
1
2
Close it securely
Insert and press
at both sides.
1
Close down
2
Press both ends
and center of the
front panel
3
Front panel A
Unit B
Note: Lift up the panel
horizontally so that Panel
A is inserted and pressed
into Unit B directly.
Connect the panel to the
unit.
Air lters
Every 2 weeks
• Wash/rinse the lters gently
with water to avoid damage to
the lter surface.
• Dry the lters thoroughly under shade, away
from re or direct sunlight.
• Replace any damaged lters.
Remove air lter Attach air lter
Insert into the three unit
For seasonal inspection after extended
non-use
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select COOL
operation. After 15 minutes of operation, it
is normal to have the following temperature
difference between air inlet and air outlet
vents:
COOL: ≥ 8 °C
For extended non-use
• Turn off the power supply and unplug.
• Remove the remote control batteries.
Indoor unit
Aluminium n
Air lters
Front panel
To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. Dirty unit may cause malfunction.
Please consult authorised dealer.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium n, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap (
pH 7) or neutral household
detergent.
• Do not use water hotter than 40 °C.
Raise
handle
To Next Page
Loading...
