Panasonic CS-PS36RKV

18
To set the timer
The On and Off time can be set in the 12 hour
range in 1 hour increment.
Example: set timer on in 8 hours
Example: set timer off in 8 hours
※
Set the “ON TIMER” only when unit in off period.
During ON period the “ON TIMER” is invalid.
※
Set the “OFF TIMER” only when unit in on period.
During OFF period the “OFF TIMER” is invalid.
ON TIMER setting
OFF TIMER setting
Press the button

Each press can change the
set time from 6, 7, 8...12, 1,
2... 5
(When you set the timer
next time, the time shown
on the remote control is the
previously set time.)

Press and hold the button
to change setting time
continuously.
Press the button

Each press can change the
set time from 1, 2, 3, 4...12, 1,
2...
(When you set the timer
next time, the time shown
on the remote control is the
previously set time.)

Press and hold the button
to change setting time
continuously.
Press the button
(The "TIMER" indicator
on the indoor unit is
illumination (Orange)).
Press the
button
(The “TIMER” indicator
on the indoor unit is
illumination (Orange)).

 
Timer operation is base on remaining time and
once setting is only valid once, it is no repeat,
you must reset timer for next time operation.

 
The remote control shows the set Timer time.
Counter down per hour to inform the remaining
time.

 
To cancel timer, press
to stop this
function.

 
Once the power failure or operate
button, the timer function that you had setted
shall be invalid, so you must set the timer once
again.

 
When ON Timer is set, the unit may start earlier
(up to 15 minutes) before the actual set time
in order to achieve the desired temperature on
time.


The “ON TIMER” and “OFF TIMER” can not be
set simultaneously.
Note: If the Timer indicator ashed continuously,
it indicates that the unit is broken or the
protective device is activated. See page 20.