B
bauerashleyAug 18, 2025
Why does the TIMER indicator always stay on in my Panasonic CS-PZ9SKE?
- JJason MeyerAug 18, 2025
The TIMER indicator remains on because the timer setting is designed to repeat daily once it has been set.
To Next PageTo Next PageWhy does the TIMER indicator always stay on in my Panasonic CS-PZ9SKE?
The TIMER indicator remains on because the timer setting is designed to repeat daily once it has been set.
Why does my Panasonic CS-PZ9SKE's outdoor unit emit water or steam?
The emission of water or steam from the outdoor unit is due to condensation or evaporation occurring on the pipes.
Why is my Panasonic Air Conditioner cooling/heating capacity reduced at the lowest fan speed?
The cooling or heating capacity might be reduced when the fan speed is set to the lowest setting because the unit prioritizes low noise operation. To increase cooling or heating capacity, increase the fan speed.
Why does my Panasonic Air Conditioner make a cracking sound during operation?
The cracking sound you hear during operation is due to the expansion and contraction of the unit caused by temperature changes.
Why is the operation of my Panasonic CS-PZ9SKE Air Conditioner delayed a few minutes after restarting?
The delay in operation after restarting is a protection mechanism for the unit’s compressor.
Why does mist emerge from the indoor unit of my Panasonic CS-PZ9SKE Air Conditioner?
The mist emerging from the indoor unit is a condensation effect resulting from the cooling process.
Why does my Panasonic Air Conditioner make a water flowing sound during operation?
The water flowing sound you hear during operation is due to the flow of refrigerant inside the unit.
Why does airflow continue in my Panasonic Air Conditioner even after operation has stopped?
The airflow continues after the operation has stopped to extract any remaining heat from the indoor unit; this process takes a maximum of 30 seconds.
Why does the indoor fan stop occasionally during heating operation in my Panasonic CS-PZ9SKE?
The indoor fan stops occasionally during heating operation to prevent an unintended cooling effect.
Why does the indoor fan stop occasionally during automatic fan speed setting in my Panasonic Air Conditioner?
The indoor fan stops occasionally during automatic fan speed setting to help remove surrounding odors.
General| Type | Wall Mounted |
|---|---|
| Cooling Capacity | 2.5 kW |
| Refrigerant | R32 |
| Indoor Unit Dimensions (W x H x D) | 779 x 290 x 209 mm |
| Outdoor Unit Dimensions (W x H x D) | 650 x 511 x 230 mm |
| Weight (Indoor Unit) | 9 kg |
| Inverter | Yes |
| Energy Efficiency Ratio (Cooling) | 3.21 |
| Power Supply | 50 Hz |
