Panasonic CS-RE18JKE User Manual (English)

Other manuals for Panasonic CS-RE18JKE

Questions and Answers:

D
David LynchSep 5, 2025
Why is my Panasonic CS-RE18JKE showing H97 error?
- R
  Richard BrandtSep 5, 2025
  If your Panasonic Air Conditioner displays error code H97, it indicates a problem with the fan motor. This could be due to: * A short circuit inside the fan motor winding. Inspect and repair the fan motor winding. * A break in the wires inside the fan motor. Check for breaks in the wires within the fan motor. * A break in the fan motor lead wires. Inspect the lead wires of the fan motor. * A Hall IC malfunction. Replace the Hall IC. * A faulty outdoor unit PCB. Check the outdoor unit PCB.
Z
Zachary ChapmanAug 25, 2025
What to do if my Panasonic Air Conditioner doesn't receive the signal from the remote control?
- M
  Mr. Dustin ThompsonAug 25, 2025
  If the Panasonic Air Conditioner unit isn't receiving the signal from the remote control, ensure that the receiver is not obstructed. Certain fluorescent lights may interfere with the signal transmitter; please consult authorized dealer.
J
Jeffrey RoachAug 25, 2025
What to do if my Panasonic Air Conditioner shows F91 error?
- K
  kevinblackburnAug 26, 2025
  If your Panasonic Air Conditioner displays error code F91, it could be due to several reasons: * A refrigerant shortage, possibly due to a refrigerant leak. You should check for leaks. * Poor compression performance of the compressor. In this case, inspect and replace the compressor if necessary. * A closed 2/3 way valve. Ensure this valve is properly open. * Faulty indoor intake air or indoor pipe temperature sensors. Consider testing or replacing these sensors.
S
salazarjaredAug 27, 2025
What does error code H98 mean on a Panasonic CS-RE18JKE?
- S
  smithrichardAug 27, 2025
  If your Panasonic Air Conditioner displays the error code H98, it could be due to: * A clogged air filter in the indoor unit. Clean or replace the air filter. * Dust accumulation on the indoor unit heat exchanger. Clean the heat exchanger. * An air short circuit. Fix any air short circuit issues. * A faulty indoor pipe temperature sensor. Test or replace the indoor pipe temperature sensor. * A faulty indoor unit PCB. Check the indoor unit PCB.
K
Katherine MahoneyAug 27, 2025
How to fix H11 error on Panasonic CS-RE18JKE Air Conditioner?
- D
  daniel13Aug 27, 2025
  If your Panasonic Air Conditioner is showing the H11 error code, it indicates a signal transmission error or a PCB fault. Here’s what you should check: * Inspect the indoor and outdoor unit PCBs. * Verify the wiring between the indoor and outdoor units. * Inspect the connection wires between the indoor and outdoor units for any breaks. * Check the power supply waveform.
L
lisamorseAug 28, 2025
What causes F98 error on Panasonic Air Conditioner?
- N
  Nicole ChandlerAug 28, 2025
  If your Panasonic Air Conditioner shows error code F98, it indicates an over-current issue. This could be due to: * Compressor failure. Inspect and replace the compressor if necessary. * A defective outdoor unit PCB. Replace the outdoor unit PCB. * A defective inverter main circuit electrolytic capacitor. Check and replace if necessary. * Excessive refrigerant. Check for refrigerant leaks or excess.
J
Jamie WilliamsSep 6, 2025
What does F11 error code mean on my Panasonic CS-RE18JKE Air Conditioner?
- C
  Carl OrtegaSep 7, 2025
  If your Panasonic Air Conditioner is showing the F11 error, it could be due to: * Poor connector contact. Inspect and fix any poor contacts. * A faulty 4-way valve sensor. Test or replace the 4-way valve. * A faulty outdoor unit PCB. Replace the outdoor unit PCB. * A defective 4-way valve. Replace the 4-way valve.
A
Alexander LaraSep 4, 2025
What should I do if my Panasonic Air Conditioner displays error F96?
- D
  Danny CooperSep 4, 2025
  If your Panasonic Air Conditioner shows error code F96, it means the IPM is overheating. This can be caused by: * A short circuit of hot discharge air flow. Inspect and repair any short circuits in the discharge air flow. * A defective outdoor fan motor. Inspect and replace the outdoor fan motor if necessary. * Defective internal circuitry of the IPM. Replace the IPM. * A defective IPM temperature sensor. Test or replace the IPM temperature sensor.
J
jesusabbottSep 2, 2025
What causes the F99 error on a Panasonic CS-RE18JKE Air Conditioner?
- G
  glennadamSep 2, 2025
  If your Panasonic Air Conditioner displays error code F99, it indicates a DC peak issue. This could be due to: * Compressor failure. Inspect and replace the compressor if necessary. * Defective power transistor(s). Check and replace defective power transistors. * A defective outdoor unit PCB. Replace the outdoor unit PCB.
D
David LopezSep 3, 2025
What does H19 error code mean for Panasonic CS-RE18JKE Air Conditioner?
- D
  Denise GraySep 3, 2025
  The error code H19 on your Panasonic Air Conditioner indicates a problem with the fan motor. This could be due to: * A short circuit inside the fan motor winding. Inspect and repair the fan motor winding. * A break in the wires inside the fan motor. Check for breaks in the wires within the fan motor. * A break in the fan motor lead wires. Inspect the lead wires of the fan motor. * A Hall IC malfunction. Replace the Hall IC. * A faulty indoor unit PCB. Check the indoor unit PCB.