5
8
Press and hold for 5 seconds to dim or restore the
unit’s indicator brightness.
9
Press and hold for approximately 10 seconds to
show temperature setting in °C or °F.
10
Press and hold for approximately 5 seconds to show
12-hour (am/pm) or 24-hour time indication.
11
Press to restore the remote control’s default setting.
12
Not used in normal operations.
NOTES
•
and can be activated in all modes
and can be cancelled by pressing the respective
button again.
•
and cannot be activated at the same
time.
TO SET THE TIMER
• To turn ON or OFF the unit at a preset time.
Select ON or
OFF timer
Set the time Confi rm
• To cancel ON or OFF timer, press
or then
press
.
• When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation at
back cover.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting (once power is
resumed) by pressing
.
To Next Page
Loading...
