2
Quick guide
Inserting the batteries
1
Pull out the back cover of remote control
2
Insert AAA or R03 batteries
(can be used ~ 1 year)
3
Close the cover
Clock setting
1
Press CLOCK
2
Set the time
3
Confi rm
Basic operation
1
Select the desired mode
FAN
AUTO HEAT COOL
DRY
2
Start/stop the operation
POWER
• Please note that the OFF indication OFF is on
to start.
3
Select the desired temperature
•
Selection range : 16 °C ~ 30 °C (Not applicable
for FAN mode).
•
Operating the unit within the recommended
temperature may save energy.
HEAT : 20 °C ~ 24 °C.
COOL : 26 °C ~ 28 °C.
DRY : 1 °C ~ 2 °C lower than room
temperature.
•
The set temperature selection range can be
customized according to requirement. Please
consult authorised dealer.
• To dim or restore the unit’s indicator brightness,
press and hold for 5 seconds.
• Use remote control within 8 m from the remote
control receiver of the indoor unit.
The illustrations in this manual are for explanation
purposes only and may differ from the actual unit.
They are subject to change without notice for future
improvement.
F569362_YA0413-0_EN.indd 2F569362_YA0413-0_EN.indd 2 6/14/2013 10:09:46 AM6/14/2013 10:09:46 AM
To Next Page
Loading...
