Panasonic CS-RE9HKE - Operate and Display of Remote Control

26
11.3 Operate and Display of Remote Control
11.3.1 Original setting
11.3.2 Mode selecting button
AUTO, HEAT, COOL, DRY can be selected by pressing “MODE” button. Initial display of LCD is as follow
*Keeping the button depressed continuously, the operation mode will change in the following order in turn
AUTO—HEAT—COOL—DRY--AUTO
11.3.3 Temperature adjusting button
Temperature adjusting range is between 16к~30ć
11.3.4 Fan speed button
There are 5 speed levels can be selected. The display on the remote controller changes as follows by pressing the AIR SWING
button.
11.3.5 AIR SWING button
To adjust vertical airflow directions by pressing AIR SWING button (5 options)
11.3.6 QUIET/POWERFULL button
Press this button to switch among QUIET operation, POWERFUL operation and normal operation.
Start Quiet operation: Press this button until “QUIET” displaying on remote control display and indoor QUIET
indicator will light up to identify Quiet mode operating.
Start POWERFUL operation: Press this button until POWERUL displays on remote control display and indoor
POWERFUL indicator will light up to identify Quiet mode operating.
Switch Quiet /Powerful operation to normal operation: Press this button until “QUIET” and ”POWERFUL” on
remote control display disappear. Indoor unit’s “QUIET” and “POWERFUL” indicators will go out to identify the unit
returns to normal operation.
Note: QUIET and POWERFUL operation can not be active simultaneously.