REMOTE CONTROL
Maximum distances: 8m
/
QUIET
SELECT
(GREEN)
(ORANGE)
(GREEN)
(RED)
Press the remote control’s button
1 TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from
starting/stopping improperly.
2 TO SET TEMPERATURE
• Selection range: 16°C ~ 30°C.
• Operating the unit within the recommended
temperature could induce energy saving.
HEAT mode : 20°C ~ 24°C.
COOL mode : 26°C ~ 28°C.
DRY mode : 1°C ~ 2°C lower than room temperature.
3 TO SELECT OPERATION MODE
AUTO mode - For your convenience
• During operation mode selection the power
indicator blinks.
• Unit selects the operation mode according to the indoor
intake temperature and remote control temperature.
HEAT mode - To enjoy warm air
• In heat mode, it may take a while for the unit to warm up.
The POWER indicator blinks during preheating.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
4 TO SELECT FAN SPEED (5 OPTIONS)
FAN SPEED
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
10
5
TO ADJUST AIRFLOW DIRECTION
(5 OPTIONS)
AIR SWING
• In COOL mode, if AUTO is set, the louver swing
up/down automatically.
• In HEAT mode, if AUTO is set, the horizontal louver fix
at predetermined position.
6 TO ACHIEVE TEMPERATURE QUICKLY
• This setting enables the desired set temperature to be
reached quickly.
7 TO ENJOY QUIET ENVIRONMENT
• This setting provides a quiet environment by reducing the
airflow noise.
• POWERFUL AND QUIET operations can not be
activated at the same time.
8
PRESS TO RESTORE THE REMOTE CONTROL’S
DEFAULT SETTING
9 NOT USED IN NORMAL OPERATIONS
Remote Control display
To Next Page
Loading...
