Panasonic CS-RE9PKE - Quick Guide; Remote Control Setup; Basic Operation

Quick guide
Inserting the batteries
2
1
Remove the battery cover
2
Insert AAA or R03 batteries
1
(can be used ~ 1 year)
3
3
Close the cover
TIMER setting
2
A
B
1
Press SELECT
1
SELECT
SET/CANCEL 3
2
Set the time
3
Confirm
Basic operation
1 Select the desired mode
AUTO
HEAT
COOL
DRY
2
1
3
2
Start/stop the operation
POWER

as follows:
To start:
To stop:
3 Select the desired temperature


recommended temperature may save
8m
energy.


DRY

temperature.

control receiver of the indoor unit.
The illustrations in this manual are for
explanation purposes only and may differ from
the actual unit. They are subject to change
without notice for future improvement.
2