Cleaning instructions
To ensure optimal performance of the
unit, cleaning has to be carried out at
regular intervals.
Switch off the power supply and unplug
before cleaning.
Do not touch the aluminium fin, sharp parts may
cause injury.
Do not use benzine, thinner or scouring powder.
Use only soap ( pH 7) or neutral
household detergent.
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Indoor unit
Front panel Aluminium fin
Anti-bacterial filter
Air filters
Air filters
Clean the filter regularly
with water to avoid damage
to the filter surface.
Front panel
Wash gently and dry.
Remove the front panel
2 Pull out
1 Raise
Close it securely
3 Press both ends of
the front panel
1 Insert at
both sides
Dry the filters thoroughly under shade, away
from fire or direct sunlight.
Replace any damaged filters.
Remove air filter Attach air filter
Insert into the unit
Anti-bacterial filter
Vacuum
Remove the Anti-bacterial filter from front grille
and vacuum the filter whenever necessary.
Replace the filter every 10 years or replace any
damaged filter.
For seasonal inspection after extended
non-use
Checking of remote control batteries.
No obstruction at air inlet and air outlet vents.
Use Auto OFF/ON button to select Cooling/
Heating operation. After 15 minutes of
operation, it is normal to have the following
temperature difference between air inlet and air
2 Close down
8
outlet vents:
For extended non-use
Turn off the power supply and unplug.
Remove the remote control batteries.
To Next Page
Loading...
