Panasonic CS-S9TKV - How to Use; i AUTO-X Operation; Selecting Operation Mode; Sleep Mode Operation

16
How to use
Auto OFF/ON button
AUTO
OFF/ON
Use when remote control is misplaced or a malfunction occurs. Raise the front panel:
• Press the button once to use in i AUTO-X mode.
• Press and hold the button until you hear 1 beep, then release to use in forced
COOL mode.
• Press the button again to turn off.
AIR CONDITIONER
ON
OFF
SET
TIMER
CANCEL
OFF/ON
FAN SPEED
MODE
SLEEP
QUIET
AIR SWING
TEMP
OFF/ON
A
IR C
O
NDITI
O
NE
R
ON
O
FF
S
ET
TIMER
C
AN
C
E
L
TEMP
O
FF/
ON
Remote control
display
Sunlight sensor
and remote
control receiver
IndicatorHuman activity
sensor
To reach temperature quickly
• The unit controls set temperature according to
room temperature to accelerate room cooling.
i AUTO-X
Set
temperature
-1°C /
-2°F
Max = 4 hours
• After max 4 hours, the set temperature is shifted
according to activity detection.
• Fan speed is fixed at AUTO, fan speed selection
is prohibited.
• During unit is off, press will turn on the unit
with i AUTO-X mode.
• i AUTO-X mode can be cancelled by pressing the
respective button again.
MODE
To select operation mode
i AUTO-X - To reach temperature quickly
COOL - To enjoy cool air
DRY - To dehumidify the environment
SLEEP
To maximise comfort while
sleeping
(CANCEL)
• This operation provides you with a comfortable
environment while sleeping. It will automatically
adjust the sleep pattern temperature during the
activation period.
• The indoor unit indicator will dim when this
operation is activated. This is not applicable if the
indicator brightness has been manually dimmed.
• This operation is incorporated with the activation
timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).
• This operation can be set together with timer.
Sleep operation has the priority over OFF timer.
• This operation can be cancelled by pressing the
respective button when the sleep timer reaches 0.0h.
QUIET
To enjoy quiet operation
• This operation reduces airflow noise.
FAN SPEED
To select fan speed
(Remote control display)
AUTO
FAN
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
• If i AUTO-X mode is set, fan speed is fixed to
AUTO. To adjust fan speed, cancel i AUTO-X mode.
(Green)
(Orange)
(Green)
(Blue)
POWER
TIMER
ECONAVI
nanoe-G
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press and hold for
approximately
5 seconds to show
12-hour (am/pm) or
24-hour time indication.
Press to restore the
remote control to
default setting.
Not used in normal
operations.
ACXF55-04370_YZ0517-1.indb 16ACXF55-04370_YZ0517-1.indb 16 6/2/2017 2:30:34 PM6/2/2017 2:30:34 PM