Panasonic CS-Z20TKR User Manual

99
14.14.1.12 Human Activity Sensor Check Mode
 To enable Human Activity sensor abnormality check mode, during ECONAVI operation ON:
SET
Press continously for 5s
Remote control normal mode
ON
OFF
iAUTO-X
TEMP
TEMP
SET
ON
OFF
iAUTO-X
TEMP
TEMP
SET
ON
OFF
iAUTO-X
SET
Transmit ECO demo code
and after 30 seconds return to normal
mode.
Transmit sunlight sensor check code
and after 30 seconds return to normal
mode.
Transmit check code
and after 30 seconds return to normal
mode.
 During ECONAVI is ON, when CHECK signal received, if either sensors has abnormality, the 4 times abnormality
counter is ignored, ECONAVI Indicator will blink immediately and error code is memorized.
 The unit could operate without ECONAVI.
 The ECONAVI indicator blinking could be cancelled by pressing ECONAVI button again.
 If the human activity sensor has no abnormality, the CHECK process will end and continue with normal operation.
14.14.2 Sunlight Sensor
 During ECONAVI operation, the sunlight sensor detects sunlight intensity coming through windows and
differentiates between sunny and cloudy or night to further optimize energy saving by adjusting the temperature.
 Sunlight judgment is as following
Sunlight intensity reset
Judge sunlight intensity
Judge ambient condition
Temperature shift
14.14.2.1 Sunlight Intensity Reset
 The sunlight intensity will reset to zero (no sunlight condition) when
o Each time ECONAVI is activated.
o Setting temperature is changed.
o Operation mode is changed.

Panasonic CS-Z20TKR Specifications

General

Brand	Panasonic
Model	CS-Z20TKR
Category	Air Conditioner
Language	English