shown in the “Diagram”.
- The louver can be adjusted by pressing the Button/Pad again at the
Remote Control or Main Unit (Touch Control Panel) to the desired
louver position.
- When stopped with Remote Control or Main Unit (Touch Control
Panel), the louver vane is reset, and stopped at the closing
position.
“Diagram”
8.6.2. Vertical Airflow Direction
- The upward and downward airflow direction vane can be adjusted
manually by hand.
8.7. Remote Control Signal Receiving Sound
- To switch off the beep sound.
Press the “Operation OFF/ON Pad“ at the main unit continuously
14
To Next Page
Loading...
