Panasonic CZ-64ESMC2 - SW2 Switch Settings

11
EN
Auxilaly switch
Must be set to OFF position.
Beep tone switch
OFF: Beep tone when each button is pushed.
ON: No tone when each button is pushed.
Indication switch
Normally set to OFF position.
When set to ON position, indication is not displayed
on LCD of system controller.
*All switches are OFF position at shipment.
1 2 3 4 5 6 7 8
SW2
SW2
ON
OFF
Fig. 6
CZ-64ESMC2eng.indd11CZ-64ESMC2eng.indd11 2010/12/2416:58:342010/12/2416:58:34