9
(EN)
Setting
Language Clock Controller name
Preparation: Turn on the circuit breaker of units and then turn the power on. The
remote controller starts, and wait until the [Assigning] display disappears.
(If [Assigning] continues to blink for 10 minutes or more, check the
address setting of indoor units.)
Note
To return to the previous screen
Press .
1
Press .
Controller name
2
Select [Initial settings].
▲ ▼ →
3
Select the item to set.
▲ ▼ →
Language
4
Set.
▲ ▼ ◄ ► →
Default setting :
English
Clock
4
Set.
▲ ▼ → ► →
(Repeat)
5
4
2018
Controller name
4
Set.
▲ ▼ ◄ ► →
(Repeat the same procedure for all
characters.)
• Up to 16
characters
(Space is
included in
the number of
characters.)
To change the character type
Select the character type with
▲ ▼ ◄ ► and press .
To enter space
Select [Space] with ▲ ▼ ◄ ► and press .
To delete 1 character
Select [BS] with ▲ ▼ ◄ ► and
press .
5
Select [Conf].
▲ ▼ ◄ ► →
To Next Page
Loading...
