11
Language Clock
3
Select the language
to display from
among
7 languages shown
on the right.
FRANÇAIS
DEUTSCH
ITALIANO
ESPAÑOL
POLSKI
РУССКИЙ
ENGLISH
3
Set the preset date and
time.
Press
→ (Repeat)
→ . (
Press to fi nish.
)
Press
→ → .
(Press to fi nish.)
• Default setting : ENGLISH
• [--] appears in situations where the clock is reset,
such as when power is not supplied to the remote
controller for 24 hours or more.
Bluetooth
®
functionality
3
Select
[ Enable/disable].
Press → .
Number for the
selected item
Total number of items
4
Select [Enable].
Press →
→ .
(
Press twice to fi nish.
)
Enable
Disable
To disable Bluetooth
®
functionality
1. Start with step 1 and select [Disable] in Step 4.
2. Press
.
3. Press
twice to finish.
Connecting with the “Panasonic H&C Control App”
Before connecting, set Bluetooth
®
functionality to [Enable].(Step 4)
When connecting, try getting the mobile device as close as possible to the remote controller.
1.
Start the “Panasonic H&C Control App”.
The following Steps 3 and 4 are required only when connecting for
the fi rst time.
3. Confi rm the numbers on the mobile device match the 6 digits
on the remote controller.
4. Start connecting.
Mobile device
Tap “Pair”.
Remote controller
Press
.
• “ ”
is displayed on the top screen when the Bluetooth
®
connection is established. Once this step is complete, subsequent
connections will be made automatically.
2. Select the remote controller you want
to operate.
Tap
•
If the remote controller is not displayed, slide
down to update and the remote controller is
detected.
When Bluetooth
®
connection is complete, mobile device information is stored, and the above Steps 3 and 4 are
unnecessary next time Bluetooth
®
connection is made.
To Next Page
Loading...
