Panasonic CZ-RTC6BL

14
Test run
1
Press and hold the
3 buttons
simultaneously, for at
least 4 seconds.
Press , , .
2
Select [Test run].
Press → .
Number for the
selected item
Total number of items
3
Select [ON].
( The unit enters the test operation mode. Then, [TEST]
turns on.)
4
Perform the test
operation.
Press .
Press → .
Press .
5
Finish the test operation.
Perform step 1 and 2, and then select [OFF] in step 3. ([TEST]
display disappears.)
 The test operation can be performed in Heat or Cool mode.
 Temperature cannot be changed.
 The test operation mode is automatically turned off in 60
minutes. (To prevent continuous test operation)
 Outdoor units do not operate for approx. 3 minutes after the
power is turned on or operation is stopped.
 Do not use this mode for purposes other than the test operation.
(To prevent overload of the units)
 Read the Installation Instructions supplied with the units.
Attention