13
VQT0N05
∫ When inserting the card/battery
1 Notch 2 Card Slot 3 Battery Slot
•Be sure to confirm the direction to insert the card/battery.
• Insert the card/battery fully and firmly.
(The card clicks if it is fully inserted.)
• Do not touch the connecting terminal on the rear of the card.
∫ When removing the card/battery
• When you cannot remove the battery, pull the boss on the battery 2
to remove it.
1
3
2
2
1
Turn the Battery Slot downwards
while lifting the Battery Lock 1 and
then remove the battery.
Press the card until it
clicks and then pull out
the card.
VQT0N05Eng.book 13 ページ ２００４年１１月２２日 月曜日 午前１０時１２分
To Next Page
Loading...
