22
VQT0N05
∫ Setting on the clock
∫ Formatting (initialising) the card
∫ Restoring the settings
1 Press the [MENU] button and then set the item with the
Jog Ball. (P18)
Clock set Sets the date and time.
Format
If the card is formatted, all the data (including
protected files) cannot be recovered. Check the
data before formatting.
Reset settings
Resets to the initial settings except the clock
setting.
Setting the Clock
The clock is not set at the time of purchase. Set the clock on the
clock setting screen which appears at the time you turn this unit on.
(If you do not set the clock here, the clock is automatically set to
January 1st, 2000 0:00.)
Setup
l
Clock set
Preparation (continued)
VQT0N05Eng.book 22 ページ ２００４年１１月２２日 月曜日 午前１０時１２分
To Next Page
Loading...
