76
VQT0N05
1
Double-click the [ ] icon
on the task tray.
2
Select [USB Mass Storage
Device] and then click
[Stop].
3
Check that [MATSHITA SD
Multi Camera USB Device]
is selected and then click
[OK].
4 Click [Close] to close the dialogue.
• You can disconnect the USB cable safely.
≥ Depending on the OS (Windows 98SE or Me, etc.), the icon for safe
removal may not be displayed in the task tray. (There will be no
display depending on the setting on the OS.) Make sure that the
Card Access Lamp of this unit is turned off and then remove the USB
cable.
≥ If you detach this unit or disconnect the USB cable from the USB
cradle, or turn this unit off while the PC is working, an error dialog
box may appear. In such cases, click [OK] to close the dialog box.
≥ When your OS is Macintosh, discard the icon of [untitled] or
[NO_NAME] disc in [Trash] and then disconnect the USB cable.
Disconnecting the USB Cable Safely
Connecting to PC (continued)
VQT0N05Eng.book 76 ページ ２００４年１１月２２日 月曜日 午前１０時１２分
To Next Page
Loading...
