61
RQT9059
Changing the unit’s settings
You can change the unit’s settings using Setup menu.
≥The settings remain intact even if you switch the unit to standby.
1 While stopped
Press [FUNCTION MENU].
2 Press [3, 4] to select “To Others”
and press [OK].
3 Press [3, 4] to select “Setup” and
press [OK].
4 Press [3, 4] to select the tab and
press [1].
5 Press [3, 4] to select the menu and
press [OK].
6 Press [3, 4] to select the option and
press [OK].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [EXIT].
Manual Tuning
You can add or delete channels, or change programme positions.
§
If the confirmation screen appears, select “Yes” and press [OK] to
continue.
To delete a programme position
Press [3, 4, 2, 1] to select a programme position and press the
“Red” button.
To add a blank programme position
Press [3, 4, 2, 1] to select a programme position and press the
“Green” button.
To move a TV station to another programme position
1 Press [3, 4, 2, 1] to select a programme position and press
the “Yellow” button.
2 Press [3, 4, 2, 1] to select the new programme position to
which you want to assign the TV station and press [OK].
[Note]
≥When the unit sets itself automatically with VIERA Link or Q Link
function (➡ 8), only deletion of the programme position can be
performed.
≥If you delete programme position of Host Channel, the GUIDE
Plus+ data is also deleted.
To change the tuning settings for individual programme
position
1 Press [3, 4, 2, 1] to select a programme position and
press [OK].
2 Press [3, 4] to select an item and press [1].
You can make the following two settings by selecting the external
input channel (AV1, AV2, AV3) in step 1 (➡ above).
≥Video System (Auto/PAL/SECAM)
In order to record properly, make the appropriate settings to match
the connected equipment.
≥Title Page (Auto/Off)
Common procedures
Tuning
Setup
Remote Control
Clock
Quick Start
DivX Registration
Initialize
DVD 1
On
Power Save
Off
Disc
Picture
Sound
Display
Tun ing
Connection
OK
RETURN
TAB
SELECT
Others
Tabs
Menus Options
Setup
Manual Tuning
Auto-Setup Restart
Download from TV
Disc
Picture
Sound
Display
Tun ing
Connection
Others
OK
RETURN
TAB
SELECT
a
Manual Tuning
Pos
Name
Ch
Pos
Name
Ch
Delete
Add
Move
1 ARD 4
2 ZDF
2
3 N3
5
4 HR3
8
5 BR3 10
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
OK
RETURN
SELECT
Pos To change the programme position in which
the TV stations are assigned
Press [3, 4] or numbered buttons to select the
number of the desired programme position and
press [OK].
Name To enter or change the name of a TV station
Press [3, 4, 2, 1] to enter station name and
press [OK].
If the station name needs a blank space, select
the blank between “Z” and “¢”.
Channel To enter newly available TV stations or
change the channel number of an already
tuned TV station
Press [3, 4] or the numbered buttons to enter
the channel number of the desired TV station.
Wait a few moments until the desired TV station
has been tuned.
After the desired TV station is tuned, press
[OK].
Fine Tuning To obtain the best tuning condition
Press [3, 4] to adjust the best tuning condition
and press [OK].
≥Press [1] to return to “Auto”.
Video
System
To select the video system type
Press [3, 4] to select “PAL” or “SECAM” if the
picture lacks colour, and press [OK].
≥Auto
This unit automatically distinguishes PAL and
SECAM signals.
≥PA L
For receiving PAL signals.
≥SECAM
For receiving SECAM signals.
Mono To select the type of sound to be recorded
Press [3, 4] to select “On” if the stereo sound
is distorted due to inferior reception conditions,
or if you want to record the normal (mono)
sound during a stereo or bilingual broadcast,
and press [OK].
Title Page To enter the Teletext title page for a channel
Entering title page number allows the unit to
automatically record programme and station
names.
Press [3, 4] or numbered buttons to enter the
number and press [OK].
≥To find the correct title page for the station,
refer to its Teletext TV guide.
Manual Tuning
Pos
Name
Ch
Pos
Name
Ch
Delete
Add
Move
1 ARD 4
2 ZDF
2
3 N3
5
4 HR3
8
5 BR3 10
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
OK
RETURN
SELECT
Pos
Name
Channel
Fine Tuning
Video System
1
4
Auto
RETURN : leave
Manual
Tun ing
ARD
Auto
Mono
Off
Title Page
301
RETURN
SELECT
HDD and disc management/Changing the unit’s settings
RQT9059-L-Body1_mst.fm 61 ページ ２００７年１２月２６日 水曜日 午後１時１２分
To Next Page
Loading...
Need help?
General
