Convenient functions
45
VQT0P03
DVD
Convenient
functions
≥Follow steps 1 to 4 of “Channel Settings”.
[5] Select “Manual” with [3, 4] and press
[ENTER].
[6] Press [3, 4, 2, 1] to select the desired TV
station and press the [A], [B], [C] buttons to
select “Delete”, “Add”, “Move”.
To delete a programme position “Delete”:
Press [A].
To insert a blank programme position “Add”:
Press [B].
To move a TV station to another programme position “Move”:
Press [C], and then press [3, 4, 2, 1] to select the new
programme position to which you want to assign the TV station.
Press [ENTER].
≥If you have performed Manual Tuning to enter TV stations, the
“-- -----” indication may appear under “Name” on the display when
programming a G
-CODE timer recording.
∫To return to the previous screen
Press [RETURN].
∫To exit the screen
Press [RETURN] several times.
You can use the SETUP menus to start auto channel setting.
≥Follow steps 1 to 4 of “Channel Settings”.
[5] Select “Auto-Setup Restart” with [3, 4] and
press [ENTER].
≥The confirmation screen appears.
[6] Select “Yes” with [2] and press [ENTER].
≥If the country setting screen appears
Select a country with [3, 4] and press [ENTER].
Auto-Setup restarts.
∫To return to the previous screen
Press [RETURN].
∫To exit the screen
Press [RETURN] several times.
∫To stop in the middle
Press [RETURN].
List of TV Reception Channels
1 Adding, deleting, and moving channels
1 Auto-Setup Restart
Country VHF UHF CATV
Australia 0 to 12 28 to 69 45 MHz to 470 MHz
New Zealand 1 to 11 21 to 69 44 MHz to 470 MHz
Manual Tuning
Pos Name Ch
Pos Name Ch
B CA
Delete
Add
Move
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
RETURN
SELECT
ENTER
1
***
01 4
2
***
02 2
3
***
03 5
4
***
04 8
5
***
05 10
----- ---
----- ---
----- ---
----- ---
----- ---
----- ---
----- ---
----- ---
----- ---
----- ---
----- ---
----- ---
----- ---
----- ---
----- ---
M7620(GN).book 45 ページ ２００５年５月２５日 水曜日 午後１２時２分
To Next Page
Loading...
