VQT2J34
19
Watching Television
Refer to “GUIDE Plus+ system” (> 32) for detail information.
This DVD recorder has a tuner which allows it to directly receive and
record digital terrestrial channels.
Preparation:
≥ Turn on the television and select the appropriate video input to suit the
connections to this unit.
Important:
This unit does not have an analogue broadcast tuner.
1
to turn the unit on.
2
– The GUIDE Plus+ list
appears.
3
3, 4
to select the current programme, then
4
3, 4 to select “View”, then
Selecting a Channel without the GUIDE Plus+ system
To select desired channel
Press [WXCH].
To directly enter Channels
You can also select channels with the numbered buttons.
e.g., “5”: [0] > [0] > [5] or [5] > [OK]
“15”: [0] > [1] > [5] or [1] >[5] > [OK]
Tips
≥Regarding Digital Channel Information (> 44)
≥If New Channel Message appears (> 45)
≥To select Audio Description, Digital Teletext and subtitles (> 44)
≥To change DVB Multi Audio (> 67, DVB Multi Audio)
Notes
≥The GUIDE Plus+ list is not displayed immediately after initial tuning is done.
OPTION
RETURN
SLOW SEARCH
DRIVE
SELECT
PAGE
PROG CHECK
EXITSTATUS
DIRECT TV REC
EXT LINKREC MODE
REC
TEXT STTL
DISPLAY TIME SLIP
SKIP
TV
STOP
PAUSE
PLAY
x
1. 3
DELETE
INPUT
SELECT
AV
VOL
CH
CHAPTER
PAUSE LIVE TV
-10s +60s
MANUAL SKIP
OK
Landscape
TV Guide:
Sun 10/10/10
19:45
Sun 10th
All Channels
SELECT
RETURN
Guide
Change Display Mode
Page
Page
+24 hours
Prog. Type
All Types
Category
Time:
: In today’s show we will...
info
BBC 1
BBC 2
Channel 4
Channel 5
2
Emmerdale
OPTION: Select Advert, etc.
OK
OK
Watching Digital Satellite Programmes
You can view the digital satellite programmes via this unit by the following
method when “Power Save in Standby” is activated, and the digital
satellite receiver is not connected to TV.
Preparation:
≥ Connect a digital satellite receiver to this unit’s AV2 input terminals
(> 11).
≥ Turn on the digital satellite receiver.
≥ Turn on the television and select the appropriate video input to suit the
connections to this unit.
Tips
≥When “Power Save in Standby” is
deactivated (> 76), you can watch the
digital satellite programme without
turning the unit on.
Notes
≥You cannot watch digital satellite
programmes during timer recording.
1
to turn the unit on.
2
to select “AV2”.
DMR-EX773EB_VQT2J34-B.book 19 ページ ２０１０年１月７日 木曜日 午後５時８分
To Next Page
Loading...
Need help?
General
