27
VQT2J28
Advanced
operations
Advanced timer recording
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
Series recording (Digital broadcast
only)
You can record all the episodes of a series by setting just one timer
recording using the GUIDE Plus+ system.
After performing steps 1-2 (> 20)
1 While “Selection Screen” is displayed,
Select “Series Timer Rec.”.
∫ To check the schedule of the series
Press the “Blue” button in the “Selection Screen“.
:The episode to be recorded
The same icon is also displayed on the GUIDE Plus+ list.
:Repeat programme
≥This unit automatically records the programmes that are identified
to be of the same series by the GUIDE Plus+ data.
≥The series recording will be cancelled if there has been no episode
of the series for 13 weeks.
≥Titles recorded using series recording are bundled and displayed
as a “group” in the DIRECT NAVIGATOR screen (> 34) except
when using Auto Renewal Recording.
≥If the same episode has already been set for series timer recording
at a different time or on another channel, “Series Timer Rec.” will
not be selectable in the “Selection Screen”.
≥If the unit cannot record the first run, the unit will record the repeat
programme if it is available. However, this unit will not record the
repeat programme, if any part of the first run is recorded.
≥You cannot change Channel and Date in Timer Recording screen.
You can set the start time earlier and the end time later by some
minutes, up to a maximum of 10 minutes.
Selection Screen
Tue 12.10.10 12:54
RETURN
OK
View
Single Timer Rec.
Series Timer Rec.
Delete
Series Info
Tue 12.10.10
Name Date Contents
Series Information
R
S
S
S
ABC1
ABC1
ABC1
ABC1
ABC1
3. 1. Wed
21:30-22:30
26.12. Wed
21:30-22:30
19.12. Wed
21:30-22:30
12.12. Wed
21:30-22:30
5.12. Wed
21:30-22:30
Decameron 1
Decameron 2
Decameron 3
Decameron 4
Decameron 1
Tue 12.10.10 12:54
S
R
Note
Using SHOWVIEW number to make timer
recordings (Analogue broadcast only)
Entering SHOWVIEW numbers is an easy way of timer recording. You
can find these numbers in TV listings in newspapers or magazines.
1 Press [ShowView].
2 Press the numbered buttons to enter
the SHOWVIEW number.
Press [2] to move back to correct a digit.
3 Press [OK].
≥Make corrections if necessary using [3, 4, 2, 1]
(> 28, step 3).
≥When “-- ---” appears in the “Channel” column, you cannot
set timer recording. Press [3, 4] to select desired
programme position. After you have entered the information
of a TV station, it is kept in the unit’s memory.
4 Press [OK].
The timer programme is stored and the timer icon is
displayed.
“F” lights on the unit’s display to indicate timer recording
standby has been activated.
Repeat steps 1–4 to programme other recordings.
Press [Í] to turn the unit off.
Input ShowView Number 0-9, and press OK.
ShowView
Record
1:58 SP
DVD
30:24 SP
HDD Remain
TUE 12.10.10. 12:53:00
Timer
Recording
1:58 SP
DVD
30:24 SP
HDD Remain
Mode
Stop Start Channel Date
STTL
HDD
DVD
17:00 16:00 19. 10. TUE −−−
1 ARD
Programme Name
SP
HDD
All Channels : ARD
TUE 12.10.10. 12:53:00
Mode
Stop
STTL
HDD
DVD
HDD
Drive
space
SP
OK
17:00
−−−
Programme
TUE 12.10.10. 12:56:00
Check to make sure “OK” is
displayed (> 28).
e.g.,
DMREX83EG&EC-VQT2J28_eng.book 27 ページ ２０１０年１月１８日 月曜日 午後２時２９分
To Next Page
Loading...
Need help?
General
