EasyManua.ls Logo

Panasonic Digital Palmcorder PV-DV52 - LCD Monitor and Display Settings; Using the LCD Monitor; Adjusting LCD;EVF Display Settings

Panasonic Digital Palmcorder PV-DV52
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
I =._ = mll_ "IILtJ_Ir,llLo111=_":_ __. |__[Hai|(o]a= "_/ Press LCD-OPEN to unlock the LCD
monitor.The LCD (Liquid Crystal Display) monitor
can be used while recording.
LCD-OPEN
Swing the LCD monitor fully open
and adjust the viewing angle.
The LCD monitor will automatically
turn on.
When the LCD monitor is completely
closed, it will shut off automatically to
save power.
Adjust the LCD Brightness and/or
color of the LCD monitor if necessary.
Please refer to "To adjust the LCD/
EVF BRfGHTNESS or COLOR"
below.
180° 3 Start recording.
9O
Using the LCD monitor will reduce battery
operating time.
Close the LCD monitor completely when
not in use.
MENU
JOG KEY
Press MENU to display the main menu
screen.
Rotate JOG KEY to select _r'_J'_'J'e-_r_
IL"_J"=k'_'t_from the main menu screen.
(Menu OSD: pp. 60, 62)
Press JOG KEY to display the LCD/
EVF SE'FFING screen.
4
Press JOG KEY to select LCD
BRIGHTNESS, LCD COLOR, or
EVF BRIGHTNESS, then rotate JOG
KEY to adjust.
Press MENU twice to exit this mode.

Other manuals for Panasonic Digital Palmcorder PV-DV52

Related product manuals