Panasonic DMC-FT2EB - Table of Contents

2
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precautions -----------------------------------------------3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure 1)---------3
1.4. How to Discharge the Capacitor on Flash
P.C.B.----------------------------------------------------------4
2Warning--------------------------------------------------------------5
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatic Sensitive (ES) Devices---------------5
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only)-----------------------------------------------------------5
2.3. Caution for AC Cord (For EB/GC/GH/SG)-----------6
2.4. How to Replace the Lithium Battery-------------------7
3 Service Navigation------------------------------------------------9
3.1. Introduction --------------------------------------------------9
3.2. Air-leak test (inspection)----------------------------------9
3.3. Replacing the waterproof packing (waterproof
seal) -----------------------------------------------------------9
3.4. Front case Unit----------------------------------------------9
3.5. Lens Unit -----------------------------------------------------9
3.6. General Description About Lead Free Solder
(PbF) -------------------------------------------------------- 10
3.7. Important Notice 1:(Other than U.S.A. and
Canadian Market) --------------------------------------- 10
3.8. How to Define the Model Suffix (NTSC or PAL
model)------------------------------------------------------- 11
4 Specifications ----------------------------------------------------15
5 Location of Controls and Components------------------ 23
6 Service Mode----------------------------------------------------- 25
6.1. Error Code Memory Function -------------------------25
6.2. ICS (Indication of additional Camera Settings
when picture was taken) function -------------------- 28
7 Troubleshooting Guide---------------------------------------- 30
7.1. Service and Check Procedures ---------------------- 30
7.2. Air-leak Test ----------------------------------------------- 33
8 Service Fixture & Tools ---------------------------------------35
8.1. Service Fixture and Tools ------------------------------35
8.2. When Replacing the Main P.C.B. -------------------- 36
8.3. Service Position ------------------------------------------36
9 Disassembly and Assembly Instructions--------------- 38
9.1. Disassembly Flow Chart--------------------------------38
9.2. P.C.B. Location -------------------------------------------38
9.3. Disassembly Procedures------------------------------- 39
10 Measurements and Adjustments --------------------------46
10.1. Introduction ------------------------------------------------ 46
10.2. Before Disassembling the unit ------------------------46
10.3. Details of Electrical Adjustment-----------------------48
10.4. After Adjustment------------------------------------------ 51
11 Maintenance ------------------------------------------------------ 52
11.1. Cleaning Lens and LCD Panel ----------------------- 52