14 VQT4J03 (ENG)
Inserting and removing the card
(optional)/the battery
Check that this unit is turned off.
Slide the release lever ( ) to
the [OPEN] position and open
the card/battery door
[OPEN] [LOCK]
Insert the battery and card,
making sure that their
orientation is correct
• Battery: Insert the battery all the way
firmly until a locking sound
is heard, and check that it is
locked by lever ( ).
• Card: Insert the card all the way
firmly until it clicks.
Do not touch
the terminals
on the back of
the card.
Close the card/battery door
Slide the release lever to the [LOCK] position.
■
To remove
• To remove battery:
Move lever in direction of arrow.
Lever
• To remove card:
Push the card until it clicks,
then pull the card out.
●
Always use genuine Panasonic batteries (DMW-BCJ13E).
●
If you use other batteries, we cannot guarantee the quality of this
product.
●
Keep the Memory Card out of reach of children to prevent
swallowing.
●
We recommend using a Panasonic card.
To Next Page
Loading...
