Panasonic DMC-LZ8 - More Scene Modes

- 57 -
Advanced-Shooting
The setting on the AF assist lamp is
disabled.
Optical image stabilizer is xed to
[MODE2].
The initial setting for the AF mode is
[ ] (face detection).
Sunset mode
Use to take pictures of the sunset. Sunset
colour can be reproduced vividly.
The ash setting is xed to Forced
FLASH OFF [ ].
The setting on the AF assist lamp is
disabled.
ISO sensitivity is xed to [ISO100].
You cannot change the white balance setting.
Baby mode 1
Baby mode 2
Adjusts the exposure and tone to bring
out the healthy colour of your baby’s skin.
The ash will be weaker than normal if you
choose to use it.
You can set two different birthdays and
names by using [BABY1] and [BABY2].
You can display the set items when
playing back the pictures and stamp
them on the recorded pictures with [TEXT
STAMP] (P88).
You can also use the [PHOTOfunSTUDIO
-viewer-] software on the included CD-
ROM to print your baby’s age. (For
details, refer to the separate operating
instructions (PDF le) of the software.)
Age and name display setting
1
BABY1
SET
SELECT
AGE
NAME
OFF
ON
SET
•
•
•
•
•
•
•
•
•
■
Select [AGE] or [NAME] using e/r and
press q.
Select [SET] using e/r and press
[MENU/SET].
When setting [Age]:
Select year / month / day using w/q and
set them using e/r.
Setting [NAME]: Enter the name (Refer
to P86 for details on text entry)
Press [MENU/SET]
[AGE] and [NAME] is automatically set
to [ON] and displayed on the screen
when age and name is set. To change
display/none, select [ON] or [OFF] in
[AGE] or [NAME] in step 1 above, and
press [MENU/SET].
If [ON] is selected when name or
age is not set, the setup screen is
automatically displayed.
If [AGE] or [NAME] is set to [OFF], the
age or name will not be displayed.
The focus range is 5 cm (Wide) / 1 m
(Tele) to Z.
Sensitivity will be the same as when you
have set ISO limit in intelligent ISO to
[ISO MAX400].
If you turn on the camera in [BABY1] /
[BABY2], age will be displayed for about
5 seconds.
Actual age displays depend on the
[LANGUAGE] setting.
If the age is not properly displayed, check
the clock and birthday settings.
The birthday setting can be reset with
[RESET]. (P23)
The digital zoom cannot be used.
The initial setting for the AF mode is
[ ] (face detection).
1.
2.
3.
4.
•
•
•
•
•
•
•
•
•
•
Refer to P55 for details on selecting a scene menu.