g
[PROTECT]
Preventing accidental erasure of
the picture
You can set protection for the pictures you
do not want to delete to prevent them from
accidental erasure.
Select [
g
PROTECT] from playback
menu (P86).
Common operation
Press e/r to select [SINGLE],
[MULTI] or [CANCEL] and then
press [MENU/SET].
SINGLE
MULTI
CANCEL
PLAYBACK
PROTECT
COPY
SELECT
SET
Single setting
After the common operation
Press w/q to select the picture
and then press [MENU/SET] to
set/cancel.
MENU
SET
10
M
MENU
100-0001
1/19
PROTECT
SELECT
SET/CANCEL
EXIT
A
SET
The protect icon [c] appears.
CANCEL
The protect icon [c]
disappears.
Press [ ] twice to close the
menu.
■
■
1�
2�
Multi setting/To cancel all settings
Perform the same operation as in [DPOF
PRINT] (P96 to 97).
The protect setting may not be effective
in other equipment.
If you want to delete protected pictures,
cancel the protect setting rst.
While this feature protects the pictures
from accidental erasure, formatting the
card will permanently delete all data.
Sliding the Write-Protect switch A of the
SD Memory Card or the SDHC Memory
Card to [LOCK] prevents pictures from
deletion even if protection is not set.
The following functions cannot be used
with protected pictures.
[TITLE EDIT]
[ROTATE]
■
•
•
•
•
•
–
–
Press [ ] to display the [PLAYBACK] mode menu and select the item to set. (P86)
To Next Page
Loading...
