4) Right click on the SD Card Drive, and then left click on PASTE.
4.3 Using DRAG & DROP
If an icon for the SD Storage Device has been placed on the DESKTOP, the following
procedure can be used to copy the firmware file to the SD Card.
1) Insert the SD Card with the 2 photos into the SD Card Slot in the PC or USB
Reader/Writer connected to the PC. (NOTE: If an SD Card Slot or USB Reader/Writer is
not available, the camera can be connected to the PC via USB to transfer the firmware
update to the SD Card.)
2) Left click on the TZ5_a.bin icon on the DESKTOP, hold down the left mouse button,
and drag the file to the SD CARD DRIVE icon on the DESKTOP.
DMC-TZ5 Digital Camera Firmware Installation Instructions
Page 5 of 7
To Next Page
Loading...
