EasyManua.ls Logo

Panasonic DMP-B200 - Remote Control Operations; Remote Control Functions

Panasonic DMP-B200
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Getting started
VQT3C15
9
1 Turn the unit on and off (> 12)
2 Switch the media to playback (> 14)
3 Basic operations for playback (> 14–15)
4 Use according to the instructions on the screen
5 Show Top menu/Direct Navigator (> 14)
6 Selection/OK, Frame-by-frame
7 Show the sub menu
8 Select title numbers, etc./Enter numbers
9 Cancel the values that were entered
10 Mute the sound
Press again to clear
11 Adjust the volume (> 14)
12 Exit the menu screen
13 Show FUNCTION MENU (> 12)
14 Show Pop-up menu (> 14)
15 Select audio (> 16)
16 Return to previous screen
17 Show on-screen menu (> 24)
18 Show status messages (> 16)
19 Turn the unit off automatically (> 12)
20 Change the screen settings (> 13)
21 Change the setup of this unit (> 26)
Insert the button-type battery (supplied)
1 Pull out the holder.
2 Insert the battery and return the holder.
Keep the button-type battery out of reach of children to
prevent swallowing.
Range of use
The distance and angles are approximate.
Remote control
To select: Press up, down, left, or right ([3, 4, 2, 1])
To enter: Press [OK]
Frame forward / Frame backward:
(While paused) press left or right ([2;][;1])
Bottom
Pull out while pressing here
_
facing up
Lithium battery: CR2025
Remote control
signal sensor
Within 30 degrees angle
either left or right
Within 20 degrees
angle either up or
down
Remote control transmitter
Within 7 m (23 ft.) in front
DMP-B200P&PC-VQT3C15_eng.book 9 ページ 2010年12月22日 水曜日 午後6時2分

Other manuals for Panasonic DMP-B200

Related product manuals