EasyManua.ls Logo

Panasonic DMP-BD75 - Page 27

Panasonic DMP-BD75
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reference
27
VQT3A92
The images from this unit do not appear on
the television.
Picture is distorted.
¾
An incorrect resolution is selected in “HDMI Resolution”.
Reset the setting as follows:
1 While the unit is on, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
“00 rEt” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “04 PrG” is displayed on
the unit’s display.
3 Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 4 seconds.
Set the item again. ( 24)
When Dolby Digital Plus, Dolby TrueHD, and DTS-HD
audio are not output in bitstream, select “Yes” in “Restore
Default Settings” and make proper settings. ( 25)
Video is not output in high-definition.
¾
Confirm that “HDMI Resolution” in the Setup menu is set
properly. ( 24)
No subtitles.
¾
When progressive output is on, closed captions/subtitles
cannot be displayed.
The subtitles overlap closed captions
recorded on discs.
¾
Turn off the subtitles or turn off the closed caption
setting on the TV. ( 21)
A black band is displayed around the edge
of the screen.
The aspect ratio of the screen is abnormal.
¾
Confirm the “TV Aspect” is set properly. ( 23)
¾
Adjust the aspect setting on the television.
Cannot hear the desired audio type.
¾
Check the connections and the “Digital Audio Output”
settings. ( 9, 23)
¾
To output audio from a device connected with an HDMI
cable, set “HDMI Audio Output” to “On” in the Setup
menu. ( 24)
Disc cannot be played.
¾
The disc is dirty. ( 4)
Still pictures (JPEG) do not play back
normally.
¾
The images that were edited on the PC, such as
Progressive JPEG, etc., may not play back.
I can’t play back BD-Live.
¾
Confirm that this unit is connected to the broadband
Internet. ( 9)
¾
Confirm the “BD-Live Internet Access” settings. ( 22)
¾
Confirm a USB device is inserted into the USB port.
( 13)
I can’t connect to the network.
¾
Confirm the network connection and settings.
( 9, 11, 24)
¾
Check the operating instructions for each device and
connect accordingly.
Picture
Audio
Playback
Network
DMP-BD75_VQT3A92_eng.book 27 ページ 2010年12月9日 木曜日 午後9時0

Other manuals for Panasonic DMP-BD75

Related product manuals