19
Aging Perform sequence of modes as * Aging
Description shown below continually.
Display following the then mode.
Turn the power on.
Press the [5] [9] and [R] button
simultaneously for five seconds,
then [70 RET] is displayed on FL.
Press the
[ ] button to select
until [81 AIG] is displayed on FL.
Press the [OK] button .
*The command is transmitted by
attached remote control.
NOTE1:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-exe-
cute this command.
*When releasing Aging mode, press
[POWER] key over 4 seconds.
Item FL display Key operation
Mode name Description Front Key
To Next Page
Loading...
